Introduction; Features; Safety Information - Martin Ether2DMX User Manual

I
NTRODUCTION
F E A T U R E S
Thank you for purchasing the Martin Ether2DMX Router. This device
provides bidirectional conversion of 4 universes of DMX data to and from
ArtNet Ethernet.
The Ether2DMX Router allows you to
• route DMX data via ArtNet Ethernet,
• add DMX outputs to the Maxxyz controller,
• build a DMX to Ethernet to DMX bridge,
• channel DMX input to the Martin ShowDesigner,
• patch DMX input to multiple DMX outputs.
S A F E T Y I N F O R M A T I O N
The Ether2DMX Router is not for household use. For safe operation, read
this manual before use and follow the safety precautions listed below. If
you have questions about how to operate the device safely, please contact
your Martin distributor or dealer.
• Disconnect the device from AC power before removing fuses or any part,
and when not in use.
• Always ground (earth) the device electrically.
• Use only a source of AC power that complies with local building and
electrical codes and has both overload and ground-fault protection.
• Do not expose the device to rain or moisture.
• Never attempt to bypass fuses. Always replace defective fuses with ones
of the specified type and rating.
• Refer all service to a qualified technician.
• Do not modify the device or install other than genuine Martin parts.
4 Ether2DMX Router user manual
1