Table of Contents
Advertisement
S U B N E T M A S K
There are three possible subnet mask settings. For use with a Maxxyz
console, use subnet mask 255.0.0.0.
To set the subnet mask
1 Press MENU to enter setup mode.
2 Navigate to menu 2, "Set Subnet Mask" using the scroll wheel or arrow
keys. Press ENTER.
3 Select the desired subnet mask. (255.0.0.0 for Maxxyz)
4 Press ENTER to save the setting. Press MENU to exit setup mode.
O P T I O N A L S E T T I N G S
U S E R I D
You can define an ID number to keep track of multiple routers.
D I S P L A Y M O D E
With "Display Auto" > "On", the Ether2DMX Router displays three status
screens at fixed intervals. With "Display Auto" > "Off", the display does not
scroll but you can change views manually with the scroll wheel or arrow
keys.
D E V I C E N A M E
You can edit the text displayed to the right of the software version number
in the port status display. The displayed text may be 15 characters long.
U N I V E R S E N U M B E R I N G
With "Display Universe Mode" > "Decimal", universes are displayed in 1-
based decimal format when patching universes in setup mode.
"Hexadecimal" displays universe numbers in 0-based hexadecimal format.
Note that the status display always uses hexadecimal format.
10
Ether2DMX Router user manual
Advertisement
Table of Contents
