The front plate has an 8x3 LED matrix that displays 10 Mb activity, 100 Mb activity and collision on each port. The Ethernet Switch may be used to split out a single ethernet link from a console to several Ethernet/DMX nodes, or link several consoles together.
S a f e t y i n f o r m a t i o n The Ethernet Switch is not for household use. For safe operation, read this manual before use and follow the safety precautions listed below. If you have questions about how to operate the device safely, please contact your Martin distributor or dealer.
A C o p e r a t i n g r a n g e The Ethernet Switch power supply is fully auto-sensing and the device can be connected to AC power at any voltage from 90 to 250 V at 50 or 60 Hz.