Haier DWL3025 Installation Manual page 17

Put cardboard under dishwasher until it is installed. The cardboard
will help protect floor during installation.
appliance wires "I" through hole in terminal
CSA-certified clamp connector "J" to
you are installing a power supply cord kit,
do so now and follow kit instructions.
5. Measure height of cabinet opening from
underside of countertop to floor where
need the lowest point). Check chart for
that height opening. Put wheels "L" in the
required position. Turn both front leveler
legs to the same height.
Min Cutout Wheel Position
Height (See Illustration)
34" (86.4 cm)
34 1/4" (87 cm)
34 1/2" (87.6 cm)
If the minimum cutout height is less than
removed for additional clearance. This will
will be more difficult to move into position.
If the wheels are removed, protect the floor
when moving the dishwasher.
HELPFUL TIP:
Number of Turns
on Front Leg
1 10
2 5
3 0
English
H
I
J
K
16