Table Of Contents; Warning Decal Placement - Pro-Form XP 185 U User Manual
Hide thumbs
Also See for XP 185 U:
- User manual (24 pages) ,
- User manual (20 pages) ,
- User manual (24 pages)
Table of Contents
Advertisement
TABLE OF CONTENTS
WARNING DECAL PLACEMENT
..............................................................
2
IMPORTANT PRECAUTIONS
................................................................
3
BEFORE YOU BEGIN
......................................................................
4
ASSEMBLY
...............................................................................
5
HOW TO OPERATE THE EXERCISE CYCLE ...................................................
11
MAINTENANCE
AND TROUBLESHOOTING
...................................................
17
EXERCISE GUIDELINES
...................................................................
18
PART LIST
..............................................................................
22
EXPLODED DRAWING
....................................................................
23
ORDERING REPLACEMENT
PARTS ..................................................
Back Cover
90 DAY FULL WARRANTY
..........................................................
Back Cover
WARNING DECAL PLACEMENT
The warning decal shown here has been
applied in the location shown. If the decal is
missing
or illegible,
call 1-888-533-1333
/
and request a free replacement
decal.
Apply the decal in the location
shown.
Note: The decal may not be shown at actual
size,
Y
• Misuse of this machine
may result in serious
injury.
• Read user's manLtal
prior to use and follow
aH warnings and
instructions.
• Do not aflow children
on or around machine,
• Pedals continue to
spin when you stop
pedaling.
• Spinning pedals can
cause injury.
• Reduce pedal speed
in a controlled manner.
• User weight must not
exceed 250 pounds.
=Replace label if
damaged, iflegible, or
removed.
_]
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the XP 185 U and is the answer not in the manual?
Questions and answers
How to open the console to access the battery compartments because on the right side the batteries do not fit tightly with about a half inch gap
To access the battery compartment of the Pro-Form XP 185 U console, follow these steps:
1. Remove the battery cover from the console.
2. If the battery cover is attached with screws, unscrew them first.
3. Insert four D batteries into the battery compartments, ensuring correct orientation as shown in the diagrams inside.
4. Reattach the battery cover securely.
Important: If the console has been exposed to cold temperatures, let it warm to room temperature before inserting batteries to prevent damage to the display or electronic components.
This answer is automatically generated
Accessed the battery compartment and found that the spring on one compartment was completely broken off and is missing. Not reparable I assume. I appreciated your reply on how to access the batteries and I thank you for your precious time.
The manual does not provide specific instructions for replacing a broken spring in the battery compartment. However, you can try the following general steps:
1. Remove the Battery Cover – Detach the battery cover, which may be secured with screws.
2. Take Out the Batteries – Remove any existing batteries from the compartment.
3. Inspect the Spring – Check the broken spring’s position and how it is attached.
4. Replace the Spring – If you have a replacement spring, carefully insert it in the same position as the original. If the spring is soldered, you may need a small soldering tool.
5. Reinsert the Batteries – Ensure they are oriented correctly as shown in the compartment diagram.
6. Reattach the Battery Cover – Secure the cover back in place.
If you need a replacement part, check the manual for ordering details or contact customer support.
This answer is automatically generated
@Mr. Anderson thank you for your input! I will try to find a spring to replace and solder it for the fix. Thank you also for your precious time. Is it possible if I can not fix to purchase an entire new console?
Pedals suddenly locked up, can’t rotate
The pedals on the Pro-Form XP 185 U may have locked up and cannot rotate because the belt is too tight or misaligned. If the belt is too tight, it can prevent the crank and pedals from turning smoothly. To fix this, loosen the M10 x 22mm Bolt (45), adjust the tension using the M8 x 38mm Hex Screw (69), then retighten the M10 x 22mm Bolt.
This answer is automatically generated