Adjustment Tips; Standard Displays With Additional Functions - Sennheiser EM 100 G3 Manual

Adjustment tips

Display Function of the menu item
Extended menu "Advanced Menu"
Sets the receiving frequencies for the frequency bank "U"
Special function: Sets a channel and a receiving frequency for the frequency bank "U":
Tune
Select this menu item and call it up by pressing the
appears.
Guitar Tuner Selects the mode of the guitar tuner function
Pilot Tone Activates/deactivates the pilot tone evaluation
LCD Contrast Adjusts the contrast of the display panel
Reset Resets the receiver
Software
Displays the current software revision
Revision
Exit Exits the extended menu
18
"Advanced
Adjustment tips
The operating menu allows you to make settings for your receiver and your transmitters.
The standard displays "Guitar
UP/DOWN, without having to get into the operating menu.

Standard displays with additional functions

Tuning a guitar (for SK transmitters only)
Activate the "Guitar Tuner" standard display via the operating menu.
Connect a guitar to your SK transmitter.
Change to the "Guitar Tuner" standard display (see page 15).
PEAK 1. 1
ew100 G3
40 0
543.200
MHz
-10
25
-20
10
-30
P
MUTE
RF AF
"Receiver Parameters"
standard display
Tune your guitar.
The receiver automatically recognizes the pitch of the plucked string.
Doing a soundcheck
By doing a soundcheck, you can check the reception area for field strength gaps ("dropouts")
which cannot be compensated for by the receiver's diversity circuitry. You can do the sound-
check without the help of another person.
Switch the transmitter on.
SET button
Menu" and returns to the main menu
Tuner" and "Soundcheck" can be called up by pressing the
PEAK
40 0
-10
25
-20
10
-30
RF AF
"Guitar Tuner"
standard display
¿
until the channel selection
MUTE
440 Hz