Sennheiser EM 100 G3 Manual page 19

Display Function of the menu item
Main menu "Menu"
Adjusts the squelch threshold
Adjustment range: 5 dBμV ("Low"), 15 dBμV ("Middle"), 25 dBμV ("High"), can be switched off
Special function (for servicing purposes only):
With the squelch threshold set to "Low" , you switch the squelch off by keeping the
sed for 3 seconds. If you then press the
CAUTION!
Squelch
Easy Setup Scans for unused frequency presets, releases and selects frequency presets
Frequency
Preset Changes the frequency bank and the channel
Name Enters a freely selectable name
Adjusts the audio output level
Adjustment range: –24 dB to +24 dB, adjustable in 3-dB steps, 6 dB gain reserve
AF Out Special function "gain reserve":
When you have adjusted a level of +18 dB, press the
appears.
AutoLock Activates/deactivates the automatic lock mode
Advanced Calls up the extended menu
Exit Exits the operating menu and returns to the current standard display
Submenu "Easy Setup"
Reset List Releases all locked frequency presets and selects an unused frequency preset
Current List Selects an unused frequency preset
Scan New List Scans for unused receiving frequencies (frequency preset scan)
Exit Exits the submenu
button ´, you switch the squelch on again.
UP
Danger of hearing damage and material damage!
If you switch the squelch off or adjust the squelch threshold to a very low
value, loud hissing noise can occur in the receiver.
The hissing noise can be loud enough to cause hearing damage or overload the
loudspeakers of your system!
Always make sure that the squelch is switched on (see above).
Before adjusting the squelch threshold, set the volume of the audio out-
put level to the minimum.
Never change the squelch threshold during a live transmission.
"Advanced Menu"
"Easy Setup" and returns to the main menu
Using the operating menu
DOWN ´
´
UP button until the next higher value
pres-
17