Using the receiver
14
Deactivating the lock mode temporarily
You can activate or deactivate the automatic lock mode via the
lock mode is activated, you have to temporarily deactivate it In order to be able to operate
the receiver:
Press the
SET
SET
"Locked" appears on the display panel.
Press the
UP/DOWN
"Unlock?" appears on the display panel.
SET
Press the
SET
The lock mode is temporarily deactivated:
When you are in the operating menu
The lock mode is deactivated as long as you are in the operating menu.
When one of the standard displays is shown
The lock mode is automatically activated after 10 seconds.
The lock mode icon
flashes prior to the lock mode being activated again.
PEAK
20.12
ew100 G3
40
0
533.875
-10
MHz
25
-20
10
-30
P
RF
AF
Muting the audio signal
To
mute
the audio signal:
When one of the standard displays is shown on the display panel, press the
STANDBY
button.
"RX Mute
On?" appears on the display panel.
SET
Press the
SET
The audio signal is muted.
To
unmute
the audio signal:
Press the
STANDBY
"RX Mute
Off?" appears on the display panel.
SET
Press the
SET
The muting is canceled.
button.
button.
button.
button.
button.
button.
"Auto
Lock" menu item. If the