Table of Contents
Advertisement
Finishing
8. Finishing Techniques
8.1 Useful Tools/Equipment
•
Safety Goggles
•
Mask
•
Long-nose Pliers
•
Wire cutters
•
Sandpaper (100,200,300,400,500,600 Grit)
•
Medium, fine and extra fine sanding sponges
•
Acrylic based primer spray paint
•
Acrylic based spray paint (colour of your choice)
•
Acrylic based varnish spray paint
NOTE: Different paint types are also compatible with PLA and ABS. Consult your local paint supplier
for the best compatibility for your intended purpose.
8.2 Removing Support Material
Even after support material is removed by hand, residual material will remain.
Ensure that safety goggles and a mask are worn for protection
1.
Remove most of the support material by hand, taking care not to
2.
damage the 3D object
Using the long-nose pliers, carefully grasp some of the remaining
3.
material, then twist to remove. Repeat until no more material can be
removed.
Using the wire cutters, cut away any excess filament.
4.
AFTER SALES SUPPORT
86-571-23290996
support@wanhao3dprinter.com
Model : Duplicator I3 V2
50
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Duplicator I3V2 and is the answer not in the manual?
Questions and answers