Adding Your Wanhao 3D Printer To Cura; Loading A 3D Design Into Cura; Viewing And Positioning Your 3D Model In Cura - WANHAO Duplicator I3V2 Instruction Manual

Using Cura
6.2 Install CURA WANHAO edition onto your
computer
Double click the file: CURA_WANHAO_15.04.EXE
1.
Follow the instruction and click install and next.
2.
The software has already embedded all the basic
3.
settings for your Wanhao i3.

6.3 Loading a 3D Design into Cura

Clear the platform using File > Clear platform...
1.
Then, load your 3D Design file onto the platform using
2.
File > Load model file...
Load any file with the following extensions: .STL, .OBJ, .
3.
DAE, .AMF
TIP: You can load more than one file onto the platform. Cura will automatically move the
additional files to fit.
NOTE: Files in grey are outside of the print area and need to be moved or scaled to fit.

6.4 Viewing and Positioning your 3D Model in Cura

Changing the View:
Zooming In/Out: Use the mouse scroll wheel
•
Rotating the View: Hold down the right mouse button and move the mouse
•
Move Position:
Move your model to change where it is printed on the build plate. Do this by left clicking on the
model and dragging it to the desired location. The black outlined corner represents the lower left
hand corner of the Heated Print Bed on your printer.
AFTER SALES SUPPORT
86-571-23290996
support@wanhao3dprinter.com
Model : Duplicator I3 V2
32