Page 1
MC 4M Operating instructions 107145556 C (03.2015)
Page 2
1 Symbols used to mark instructions WARNING & Safety instructions in these operating instructions which must be ob- served to prevent risks to persons are marked with this danger symbol. Before starting up your high- pressure washer for the first time, this safety instruction must be read through carefully.
Page 3
dle, kickback forces are produced at the spraying device and when the spray lance is held at an angle, a torque is also created. The spray handle and spray lance must therefore be held firmly with both hands • Check that cleaning will not result in dangerous substances (e.g. asbestos, oil) being washed off the object to be cleaned and harming the environment •...
Page 4
CAUTION High-pressure hoses, fittings and couplings are important for the safety of the clean- er. Use only high-pressure spare parts approved by Gerni! • If the supply cord is damaged it must be replaced by the manufacturer, its service agent or similarly qualified persons to prevent hazards.
Page 10
12. Holder for spray lance*) Check / tip up oil to max (SAE 80W-90) 13. Holder with a 2½ l canister *) Oil max v.s. pumptype MC 4M (NA4) 14. Cabinet lock 15. Foam Sprayer *) 16. Flexo Power lance*) 17.
Operating instructions Troubleshooting MC 4M Fault Cause Remedy Air in suction hose. Fill hose with water and connect again Pressure Not enough water supply Stop! Until appropriate water mains or hose reflect fl uctuations pump Qmax Water filter is clogged up...
Page 12
DK-2605 Broendby DENMARK Hereby solely declare, that the products: Product Description Type HPW - Professional - Mobile 230/1/50, IPX5 MC 4M* Are in compliance with the following standards: EN 60335-1:2012 EN 60335-2-79:2012 EN 55014-1:2006+A1:2009+A2:2011 EN 55014-2:1997+A1:2001+A2:2008 EN 61000-3-2:2006+A1:2009+A2:2009 EN 61000-3-11:2000...
Specifications Gerni MC 4M-160/620 240/1/50/15 Country variant V/ph/Hz 240/1/50 Possible voltage Fuse Power rating bar (MPa) Working pressure (16) Water flow bar (MPa) (20) Max. water pressure Water flow 60, >40 max. 1 h. Max water inlet temperature, Intake-Pressure °C (°F) (140, >104 max.
Page 16
AUSTRALIA: Nilfi sk-Advance Pty LTd Unit 1/13 Bessemer Street Blacktown NSW 2148 Phone: 1300 556 710 E-mail: sales@gerni.com.au...
Need help?
Do you have a question about the MC 4M and is the answer not in the manual?
Questions and answers