Kenmore 795. 72063.11 series Service Manual page 82

13-3-2 Icemaker not making ice or not making enough ice
(Icemaker Unit & Ice-detecting sensor Diagnosis)
▶ Icemaker Unit and Ice-detecting sensor Diagnosis
The icemaker unit and Ice-detecting sensor is programmed to be diagnosed.
Follow the procedure step by step to check to see if icemaker and Ice-detecting sensor is working normally.
Icemaker Unit
1 st STEP (Icemaker Unit Diagnosis)
Press the test switch (located on the bottom of the icemaker head) for about 3 seconds. The icemaker tray should turn to
the twisting position and return to the flat position, the fills with water.
CAUTION: Be sure that the ice tray is not filled with water before pressing fill key.
Test Switch
- 82 -
Ice-detecting sensor