Icemaker Operating Method And Trouble Shooting - Kenmore 795. 72063.11 series Service Manual

13. ICEMAKER OPERATING METHOD AND TROUBLE SHOOTING

13-1 Icemaker's Basic Operating Method
Power On Power On
Start Position
Icemaking
Mode
Full Ice
Check
Full Ice?
Harvest
Mode
Fill
Test Mode
To reset the icemaker's operation, set the power switch OFF position and back it to ON position.
Power
Switch
Ice Tray
Ice-detecting sensor
Icemaker Unit
- 80 -
• Adjusts Ice Tray to Start Position with power on. • Adjusts Ice Tray to Start Position with power on.
• Waits until water becomes ice.
※For cold air circulation, Ice tray will be
on a slightly tilt one hour after
ice-making mode begins. Atilt ice tray
means icemaker's normal operation.
• If water becomes ices in the ice tray, Ice-detecting
sensor check if the ice bin is full.
• Twist the ice tray to drop ice into the ICE BIN.
• Supply water to the ice tray by operating the solenoid
valve.
• To force water to supply to the ice tray, or check
icemaker's condition press and hold the FILL Key for
about 3seconds.
In the test mode, The icemaker will run through 3
stages step by step
: Harvest → Fill water → Ice making
Ice Tray on a slightly tilt