Programmable Functions; Standard Functions - GME TX3600 Series Instruction Manual

FUNCTION
Transmit hi/Lo Power
Monitor
Squelch
Talk-Around
oS/gS Toggle
Page (Transpond)
Recall CH M1
Recall CH M2
Recall CH M3
Recall CH M4
Speed Dial Selcall Memory
recall Ch M1 + Dial Selcall Mem
recall Ch M2 + Dial Selcall Mem
recall Ch M3 + Dial Selcall Mem
recall Ch M4 + Dial Selcall Mem
Speed Dial DTMF M1
Speed Dial DTMF M2
Speed Dial DTMF M3
Speed Dial DTMF M4
Tick the boxes that match the function keys on your radio with the specific feature programmed by your retailer.

STANDARD FUNCTIONS

TURNING THE TX3600 SERIES ON OR OFF
Rotate the Volume control clockwise past the 'click' to
turn the TX3600 Series ON. Rotate the control fully counter
clockwise past the click to turn the radio oFF.
MC522BC- Press and hold the PWR key for 2 seconds to
turn the unit ON. Press and hold the PWR key for 2 seconds
to turn the unit OFF.
ADJUSTING THE RECEIVER VOLUME
While receiving a signal, rotate the Volume control to
achieve a comfortable listening level.
While receiving a signal, press the + to increase
MC522BC-
the volume and press the – to decrease the volume to
achieve a comfortable listening level.
T X 3 6 0 0 S ErI ES

PROGRAMMABLE FUNCTIONS

A F1 F2 F3
Scan
Quiet
INSTrUCTIoN MA NUA L
F4 B
recall Ch M1 + Dial DTMF M1
recall Ch M1 + Dial DTMF M2
recall Ch M1 + Dial DTMF M3
recall Ch M1 + Dial DTMF M4
recall Ch M2 + Dial DTMF M1
recall Ch M2 + Dial DTMF M2
recall Ch M2 + Dial DTMF M3
recall Ch M2 + Dial DTMF M4
recall Ch M3 + Dial DTMF M1
recall Ch M3 + Dial DTMF M2
recall Ch M3 + Dial DTMF M3
recall Ch M3 + Dial DTMF M4
recall Ch M4 + Dial DTMF M1
recall Ch M4 + Dial DTMF M2
recall Ch M4 + Dial DTMF M3
recall Ch M4 + Dial DTMF M4
If there are no signals present, press the Squelch key,
briefly to open the Squelch, then adjust the volume while
listening to the receiver's background noise. When finished,
briefly press the Squelch key again to return the receiver to
the quiet state.
If your radio does not have a Squelch key and there are no
signals present, set the Volume control to the 11 o'clock
position as a starting point.
MC522BC-
If the radio does not have a Squelch key and
there are no signals present, set your volume to 12 as a
starting point.
Note: The minimum setting of the volume control has
been factory preset so that, even with the volume turned
right down, you can still hear a low level sound from
the speaker).
FUNCTION A F1
Call
Keylock
Monitor (Toggle)
S-Meter (Toggle)
F2 F3 F4 B
PAg E 5