GME TX3600 Series Instruction Manual page 19

selected, 'PAgEr' will be displayed in the Selcall area.
MC522BC- Press the
memory 39. The selected selcall memory number is
displayed in the channel display area. If Alpha mode is
selected, 'PAgEr' will be displayed in the Selcall area.
PAGE Selcall Ident
MC522BC OPTION
Selcall memory 39
3. Briefly press the Volume knob to select the Numeric
mode. 'NUMEr' will appear briefly in the Selcall display
area when Numeric mode is selected.
MC522BC- Briefly press the B key to select the Numeric
mode. 'NUMEr' will appear briefly in the Selcall display
area when Numeric mode is selected.
4 To enter the EDIT mode, press and hold the Channel
Selector knob until a beep is heard. 'EDIT' will appear
briefly in the selcall display area and the right hand selcall
digit will begin flashing.
MC522BC- To enter the EDIT mode, press and hold the
A key until a beep is heard. 'EDIT' will appear briefly in
the selcall display area and the right hand selcall digit
will begin flashing.
5. rotate the Channel Selector knob to alter the flashing
digit. When the correct digit is displayed, briefly press
the Channel Selector knob to move to the next digit.
Continue the process until the required Selcall Ident
is displayed.
MC522BC- Press the
digit. When the correct digit is displayed, briefly press the
A key to move to the next digit. Continue the process
until the required Selcall Ident is displayed.
6. Now press and hold the Channel Selector knob again
to store the Ident. All the digits will flash, then the radio
will beep and 'SAVED' will appear briefly in the
selcall area.
T X 3 6 0 0 S ErI ES
and keys to select Selcall
Selcall memory 39
PAGE Selcall Ident
and keys to alter the flashing
INSTrUCTIoN MA NUA L
Now press and hold the A key again to store the
MC522BC-
Ident. All the digits will flash, then the radio will beep and
'SAVED' will appear briefly in the selcall area.
Viewing the Page ident Memory:
To view the Ident or Name stored in the page memory:
1. Briefly press the CaLL key on the microphone. 'Call
To' will appear on the display, and the Selcall Ident for
memory location 1 will be displayed.
2. Rotate the Channel Selector knob to select Selcall
memory 39. The selected selcall memory number is
displayed in the channel display area. If Alpha mode is
selected, 'PAgE' will be displayed in the Selcall area.
MC522BC- Press the
memory 39. The selected selcall memory number is
displayed in the channel display area. If Alpha mode is
selected, 'PAgE' will be displayed in the Selcall area.
activating the PAGE Mode:
Select the Page mode by briefly pressing the PAGE function
key on your radio.
'PAgE' will be displayed in the Selcall area and the display
lighting will extinguish after 10 seconds to conserve power
in case the radio is to be left in Page mode for an extended
period. This also makes the radio less visible if it is left in an
unattended vehicle at night.
deactivating the PAGE Mode:
To de-activate the page mode, briefly press the PAGE
function key again.
receiving your Selcall in PAGE Mode:
If your TX3600 Series receives its own Selcall Ident while
in the PAGE mode, it will temporarily switch to the paging
channel, check that the channel is not in use, then transmit
the paging Ident to the other receiver. It will then return to
the channel on which the original call was received, activate
its own Selcall alarm and display the caller's Ident.
Meanwhile the other receiver will be beeping to tell you that
someone has called you. you can then return to your radio,
Identify the caller's Ident and return the call.
The PAGE mode can be used either while monitoring a single
channel or while scanning in open scan or group scan mode.
Monitoring a Single channel in the PaGE Mode:
To monitor a single channel in the PAGE mode, simply select
the channel you wish to monitor, then select the Page mode
by holding the CaLL key down and pressing the Channel
Selector knob.
MC522BC-
To monitor a single channel in the PAGE mode,
simply select the channel you wish to monitor, then select
the Page mode by holding the CaLL key and pressing the
A key.
and keys to select Selcall
PAgE 19