Gaggenau AL 400 Installation Instructions Manual page 10

5 Level the appliance in the cupboard. Ensure that
the cover for the appliance lays flat on the
countertop. Bend the lower end of the fastening
bracket by 90° at the perforation. Screw the
fastening bracket on the appliance and on the
furniture bottom with the included sheet metal
screws.
6 Fasten the control unit to the side wall of the
fitted unit.
9
CAUTION
Penetrating moisture may cause electric
shock. Do not secure the control unit to the
base of the fitted unit.
10
7 Fasten the furniture bar. The holes for fastening
the furniture bar are already provided on the
appliance. Screw the furniture bar to the
appliance and the countertop with the included
sheet metal screws.
8 Depending on the installation situation, the
exhaust air outlet may run in three different
directions (A, B and C)
Notes
‒ Depending on the installation situation,
different connecting studs are required.
‒ Follow the instructions for the fan module for
exhaust air outlet.
.