Questions & Answers On Bread Baking Machines - BOMANN CB 593 Instruction Manual

Купить хлебопечки Боманн в интернет-магазине http://clatronic-shop.com.ua
Questions & Answers on Bread Baking Machi Questions & Answers on Bread Baking Machi Questions & Answers on Bread Baking Machi Questions & Answers on Bread Baking Machines
Problem Problem Problem Problem
The appliance or the display are
not functioning.
Smoke comes out of the baking
compartment or of the vents.
The bread goes down in the
middle and is moist on the bottom.
It is difficult to take the bread out of
the baking tin.
The ingredients are not mixed or
the bread is not baked correctly.
The appliance does not start. The
time acoustic signal goes off. The
display shows H:HH.
Хлебопечка Боманн BOMANN CB 593 / 595
Cause Cause Cause Cause
You have not inserted the plug.
You have not switched the On/Off
switch (L) on.
The ingredients stick to the baking
compartment or on the outside
of the baking tin.
The bread is left too long in the
tin after baking and warming.
The bottom of the loaf is stuck
to the kneading peg.
Incorrect program setting
The START/STOP key was
touched while the machine was
working
The lid opened several timers
while the machine was working.
Long blackout while the
machine was working.
The rotation of the kneading
pegs is blocked.
The appliance is still hot after
the previous baking procedure.
nes nes nes
Solution Solution Solution Solution
Check the plug and the switch.
Pull out the plug and clean the
outside of the baking tin or the
baking compartment.
Take the bread out of the baking
tin before the warming function is
over.
Clean the kneading peg and shafts
after the baking. If necessary, fill
the baking tin with warm water for
30 minutes. Then the kneading
pegs can be easily removed
and cleaned.
Check the selected menu and the
other settings.
Do not use the ingredients and
start over again.
The lid is to be opened only if the
time left on the display is more
than 1:30 hours. Make sure that lid
was closed well after being
opened.
Do not use the ingredients and
start over again.
Check that the kneading pegs are
blocked by grains, etc. Pull out the
baking tin and check whether the
drivers turn. If this is not the case,
send the appliance to the customer
service.
Press the START/STOP key
for 10 sec. until 1 3:00 (normal
program) appears. Pull out the
plug. Take out the baking tin and
leave it to cool at room
temperature. Then insert the plug
and start again.
27