Bread Baking Machine Functions; Commissioning And Bread Baking Machine Program Phases - BOMANN CB 593 Instruction Manual

Купить хлебопечки Боманн в интернет-магазине http://clatronic-shop.com.ua
11. SANDWICH SANDWICH SANDWICH SANDWICH
12. BACKEN BACKEN
BACKEN BACKEN
Buzzer function Buzzer function
Buzzer function Buzzer function
The buzzer goes off:
When pressing all the program keys;
•
During the second kneading cycle of the NORMAL, VOLLKORN, SCHNELL, ULTRA SCHNELL, KUCHEN
•
and SANDWICH programs to signal that the cereals, fruit, nuts or other ingredients can be added.
When the end of the program is reached.
•
During the warming phase at the end of the baking procedure the acoustic signal rings several times
Repeat function Repeat function Repeat function Repeat function
In case of a blackout the bread baking machine must be started again. This is possible only if the program was
stopped before the kneading phase was reached. Otherwise you will have to start from the beginning!
Safety functions Safety functions
Safety functions Safety functions
If the temperature of the appliance is still too high (more than 40°C) for a new program after using the appliance
previously, H:HH will appear on the display when pressing start again and an acoustic signal is given. If this is
the case, press the START/STOP key until the H:HH message is deleted and the basic setting appears on
the display. Remove the container and wait until the appliance has cooled.
The BACKEN program can be started immediately even when the appliance is still hot.
Commissioning and

Commissioning and Bread Baking Machine Program phases

Commissioning and Commissioning and
Insert the baking tin Insert the baking tin
Insert the baking tin Insert the baking tin
The nonstick baking tin must be inserted slightly to left (counter-clockwise) and it snaps into place in the middle
of the base in the baking compartment. Then turn the tin firmly clockwise. To remove the baking tin repeat the
same procedure but in the opposite order.
Put in the ingredients Put in the ingredients
Put in the ingredients Put in the ingredients
The ingredients must be put into the baking tin in the order specified in the relevant recipe.
Select the program Select the program Select the program Select the program
1. Insert the plug in a correctly installed 230 V, 50 Hz socket with earthing contact.
2. Set the On/Off switch (l) at the rear of the appliance to " I ".
3. Select the desired program with the
4. Then select the desired degree of browning.
5. Use the TIME-keys to set the time when the program is to be started.
6. Press the START/STOP-keys.
Leave the dough to rise Leave the dough to rise
Leave the dough to rise Leave the dough to rise
After the last kneading cycle the bread baking machine is heated to the optimal temperature for the rising of the
dough.
Хлебопечка Боманн BOMANN CB 593 / 595
(Sandwich) To prepare light sandwich bread
(Bake)To brown bread or cakes
Bread Baking Bread Baking Machi
Bread Bread Baking Baking
Bread Baking Machine Program phases Bread Baking Machine Program phases Bread Baking Machine Program phases
SELECTION-key.
Machine Functions ne Functions
Machi Machi ne Functions ne Functions
23