Table 10-3 Spanning Tree Protocol: Status - ZyXEL Communications dimension ES-4024 User Manual

LABEL
Spanning Tree Protocol
Bridge
Bridge ID
Hello Time (second)
Max Age (second)
Forwarding Delay
(second)
Cost to Bridge
Port ID
Topology Changed
Times
Time Since Last Change This is the time since the spanning tree was last reconfigured.
Poll Interval(s)
Stop
10.2.1 Configuring STP
To configure STP, click the Configuration link in the Spanning Tree Protocol screen as shown next.
Spanning Tree Protocol

Table 10-3 Spanning Tree Protocol: Status

This field displays Running if STP is activated. Otherwise, it displays Down.
Root refers to the base of the spanning tree (the root bridge). Our Bridge is this switch.
This switch may also be the root bridge.
This is the unique identifier for this bridge, consisting of bridge priority plus MAC
address. This ID is the same for Root and Our Bridge if the switch is the root switch.
This is the time interval (in seconds) at which the root switch transmits a configuration
message. The root bridge determines Hello Time, Max Age and Forwarding Delay
This is the maximum time (in seconds) a switch can wait without receiving a
configuration message before attempting to reconfigure.
This is the time (in seconds) the root switch will wait before changing states (that is,
listening to learning to forwarding).
This is the path cost from the root port on this switch to the root switch.
This is the priority and number of the port on the switch through which this switch must
communicate with the root of the Spanning Tree.
This is the number of times the spanning tree has been reconfigured.
The text box displays how often (in seconds) this screen refreshes. You may change the
refresh interval by typing a new number in the text box and then clicking Set Interval.
Click Stop to halt STP statistic polling.
Dimension ES-4024 Ethernet Switch
DESCRIPTION
10-3