ZyXEL Communications dimension ES-4024 User Manual page 150

Dimension ES-4024 Ethernet Switch
enable
disable
status
port
set
radius
profile
22-10
Table 22-2 Command Summary: SYS SW
COMMAND
enable <port_no>
disable <port_no>
reauth <port_no> <on|off>
period <port_no><value>
status <port_no>
auth <profile | radius>
portcontrol<port-no><auto |auth |
unauth>
server <ip>
secret <secret>
port <port>
show
add <username> <passwd>
delete <idx>
DESCRIPTION
Enables 802.1X security on the
switch.
Disables 802.1X security on the
switch.
Shows switch 802.1X security
status.
Enables 802.1X security on the
specified port.
Disables 802.1X security on the
specified port.
Turns re-authentication on or off
on the specified port.
Configures how often the
specified port should be re-
authenticated.
Displays 802.1X security status
on the specified port.
Sets whether an external
RADIUS server or the internal
switch user database performs
authentication.
Sets how the specified port
should be authenticated.
Sets the external RADIUS server
IP address.
Sets the external RADIUS server
password.
Sets the external RADIUS server
port number.
Displays the external RADIUS
server settings.
Internal switch user database.
Information in this database is
flushed on restarting the switch.
Creates a username and
password profile in the internal
switch user database.
Deletes a username and
password profile in the internal
switch user database.
Introduction to CLI