Advertisement
Theonlytoolyou'llneedto assembleyour
vacuumcleaneris a Phillips screwdriver.
Attach handle to vacuum
1.
2.
3.
Locatethe handleand cord wrap.Remove
the screw packettaped to the handle.
Standthe vacuumupright andfrom the
rear of the unit, slide the baseof the handle
firmly into the groovesat the top of the
vacuum body.
IMPORTANT - before inserting the screws
into the handle,slide the cord wrap into the
handle.
4.
5,
6,
7.
Ensurethat the handleand cord wrap are
firmly fit to the vacuum body.If thereare
any gaps, continueto pushfirmly until the
handle andcord wrap areflush.
Insert 2 of the screws provided(3 total)
into the existing holes,attachingthe cord
wrap and handleto the body of the vacuum.
Tightensecurelywith a screwdriver.
Attachthe hoseandcord clip bysnapping
it into the handle of the unit. Secureit by
insertingthe screw provided.
Attachthe lower hoseclip by snappingit
into place andtwisting to the right.
CAUTION:
Do not plug in your
vacuum cleaner until
you are familiar with
all instructionsand
operating procedures.
/
WARNING:
Plasticfilm can be
dangerous.To avoid
danger of suffocation,
keep away from babies
and children.
www,bissell,com
800,237,7691
5
Advertisement
