Miele TX3587 Operating And Installation Instructions page 79

Problem
The machine front is
difficult to open and
close.
The coffee machine
does not rinse itself
when turned on.
When rinsing, no water
or noticeably less water
than usual runs out of
the central spout.
No coffee or noticeably
less coffee than usual is
dispensed from the
central spout. The
display and the noise
when coffee is being
made remain the same.
There is noticeably
more "coffee water" in
the waste container.
Cause and remedy
The cap on the central spout connector has either not
been lubricated or is not lubricated sufficiently.
 Check the silicone cap for damage. If necessary,
replace it with the extra cap supplied.
 Lubricate the cap with the silicone grease
supplied.
Lubricate the cap on the central spout connector
regularly once a month.
This is not a fault.
If the coffee machine still has an operating
temperature higher than 60 °C, rinsing will not take
place.
The central spout is not fitted correctly.
 Check whether the central spout has been
assembled as described (see "Cleaning and care –
Central spout").
The cap is no longer securely fitted to the central
spout connector (see "Guide to the machine").
 Check the cap on the central spout connector.
Lubricate the cap with the silicone grease
supplied.
The cap on the central spout connector is damaged
or missing.
 Replace the cap with the extra cap supplied.
 Lubricate the cap with the silicone grease
supplied.
Problem solving guide
79