Brew Unit; Removing And Cleaning The Brew Unit By Hand - Miele TX3587 Operating And Installation Instructions

Brew unit

Removing and cleaning the brew unit
by hand
Clean the brew unit by hand only
using warm water. Do not use
washing-up liquid. The moving parts
of the brew unit are lubricated.
Washing-up liquid will damage the
brew unit.
The brew unit can be removed for
cleaning.
It should be cleaned once a week.
 Open the front of the coffee machine.
 Remove the water container, waste
container and the coffee chute cover.
 Press the button under the handle of
the brew unit  and, whilst doing so,
turn the handle clockwise .
 Press the catch in front of the brew
unit  downwards, and pull the brew
unit out carefully.
 Carefully pull the brew unit out of the
coffee machine.
Cleaning and care
If you cannot remove the brew unit or
can only do so with difficulty, the brew
unit is not in the correct position (See
"Problem solving guide").
After taking the brew unit out of the
machine do not change the position
of the brew unit handle, as this
would cause the brew unit to be out
of alignment and you will not be able
to push it back into the coffee
machine.
 Clean the brew unit by hand under
warm running water without using
washing-up liquid.
 Wipe any remaining coffee off the
two filters. One filter is located in the
funnel and the other to the left of the
funnel.
 Dry the funnel to prevent ground
coffee sticking to it the next time a
coffee is prepared.
 Clean the inside of the coffee
machine. Use your vacuum cleaner to
remove dry coffee grounds.
63