Cuckoo CRP-BH06 Fuzzy Series Operating Instructions Manual page 34

TO KEEP COOKED RICE WARM AND TASTY
Controlling method of warming temperature
If the temperature in the oven is not proper, it will smell bad and the color of the rice will change
so make sure to adjust the temperature.
Press "Mode" button over 1 time
during warming. It displays as
picture with buzzer. At the time,
mean current warming
temperature.
"Menu/ Selection" button will brink, and
"Mode", "Set" and "Cancel" button will
be turned ON.
Note: The reference temperature programmed when the
product is shipped may differ from the Instruction.
Change of temperature
If you want to change cooking temperature in the standby mode, "Mode Select" button over 2 seconds,
and press it 2 more times, You can change cooking temperature.
How to operate My Mode function.
Use it while opening the lid when there is too much water or rice becomes too soft.
In standby mode, push the
"Mode" button 4 times.
The voice says that it is
programmed warming
mode, control the
temperature you want.
1. If too much water is spilled out when you open the lid :
2. If the edge of rice is too soft : Press "Menu/Selection" button to reduce the setting mode.
To raise temperature
To lower temperature
Press "Menu/Selection" button to raise the setting mode.
Press "Menu/Selection" button to
change the temperature as
"Set" button will blink, and "Mode", "Menu
selection" and "Cancel" button will be turned ON.
To switch the functions continuously,
keep pressing the button.
After setting temperature, press "Mode" select
button. Preset temperature will be stored with
buzzer sound. (If will be cancelled once press
"Cancel" button or after 7 seconds without
pressing any button)
Press "Menu/Selection" button to
change the temperature as
"Set" button will blink, and "Mode", "Menu
selection" and "Cancel" button will be turned ON.
To switch the functions continuously,
keep pressing the button.
Press "Menu/Selection" button
to change the Picture (up)
"Set" button will blink, and "Mode", "Menu
selection" and "Cancel" button will be turned ON.
To switch the functions continuously,
keep pressing the button.
Select the menu you want, then the press
the "Mode" button and set-up time will be
automatically entered with a buzzer.
(If you press the "Cancel" button or do not
press a button within 7 seconds, the
Cancelled and returned to standby mode.)
Press "Menu/Selection"
button as the picture (down)
"Set" button will blink, and "Mode", "Menu
selection" and "Cancel" button will be turned ON.
To switch the functions continuously,
keep pressing the button.