Specifications; General Safety Rules; Work Area; Electrical Safety - Makita BFH120F Instruction Manual

ENGLISH

SPECIFICATIONS

Model
Fastening torque
No load speed (RPM)
Dimensions
Net weight
Rated voltage
Hazardous Location Rating
• Due to our continuing programme of research and development, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.

GENERAL SAFETY RULES

(FOR ALL BATTERY OPERATED TOOLS)
WARNING:
Read and understand all instructions.
Failure to follow all instructions listed below,
may result in electric shock, fire and/or
serious personal injury.
SAVE THESE INSTRUCTIONS

Work Area

1. Keep your work area clean and well lit. Cluttered
benches and dark areas invite accidents.
2. Keep bystanders, children, and visitors away
while operating a power tool. Distractions can
cause you to lose control.

Electrical Safety

3. A battery operated tool with integral batteries or
a separate battery pack must be recharged only
with the specified charger for the battery. A
charger that may be suitable for one type of battery
may create a risk of fire when used with another bat-
tery.
4. Use battery operated tool only with specifically
designated battery pack. Use of any other batter-
ies may create a risk of fire.

Personal Safety

5. Stay alert, watch what you are doing, and use
common sense when operating a power tool. Do
not use tool while tired or under the influence of
drugs, alcohol, or medication. A moment of inat-
BFH040/BFH040F
0.8-4.5 N•m (7-40 in.•lbs)
190 mm x 266 mm x 71 mm (7-15/32" x 10-15/32" x 2-13/16")
1.5 kg (3.3 lbs) (with Battery Cartridge BH1220)
Class I Division 2 Rated for max 50°C ambient
USA015-1
BFH090/BFH090F
3.4-9 N•m (30-80 in•lbs)
400/min
(with Battery Cartridge BH1220)
D.C. 12 V
tention while operating power tools may result in
serious personal injury.
6. Dress properly. Do not wear loose clothing or
jewelry. Contain long hair. Keep your hair, cloth-
ing, and gloves away from moving parts. Loose
clothes, jewelry, or long hair can be caught in mov-
ing parts.
7. Avoid accidental starting. Carrying tools with your
finger on the switch invites accidents.
8. Remove adjusting keys or wrenches before turn-
ing the tool on. A wrench or a key that is left
attached to a rotating part of the tool may result in
personal injury.
9. Do not overreach. Keep proper footing and bal-
ance at all times. Proper footing and balance
enable better control of the tool in unexpected situa-
tions.
10. Use safety equipment. Always wear eye protec-
tion. Dust mask, non-skid safety shoes, hard hat, or
hearing protection must be used for appropriate con-
ditions.

Tool Use and Care

11. Use clamps or other practical way to secure and
support the workpiece to a stable platform. Hold-
ing the work by hand or against your body is unsta-
ble and may lead to loss of control.
12. Do not force tool. Use the correct tool for your
application. The correct tool will do the job better
and safer at the rate for which it is designed.
13. Do not use tool if switch does not turn it on or
off. A tool that cannot be controlled with the switch is
dangerous and must be repaired.
14. Disconnect battery pack from tool or place the
switch in the locked or off position before mak-
ing any adjustments, changing accessories, or
storing the tool. Such preventive safety measures
reduce the risk of starting the tool accidentally.
2
BFH120F
5-12 N•m (44-106 in•lbs)