Operating Mode "Map & Navigation - Bosch Nyon Operating Instructions Manual

Operating mode "Map & Navigation"
 Make sure to not be distracted by the display of the on-board
computer. If you do not focus exclusively on the traffic, you risk being
involved in an accident. If you want to make entries in your on-board
computer other than switching the assistance level, stop and enter the
appropriate data.
 Do not plan your routes whilst you are cycling. Stop and wait until
you are stationary before entering a new destination. If you do not
focus exclusively on the traffic, you risk being involved in an accident.
 Abandon your route if the navigation system suggests a path or
road which is too ambitious, risky or dangerous for you based on
your cycling ability. Have your navigation system propose an alter-
native route.
 Do not ignore any road signs, even if the navigation system tells you
to take a specific route. The navigation system cannot take roadworks
or temporary diversions into account.
 Do not use the navigation system in situations which are safety-
critical or unclear (road closures, diversions, etc.). Always carry
extra maps and means of communication with you.
Use this operating mode to download map data based on Open Street Map
(OSM) over the web. You can navigate using these maps.
The map material suitable for the place of residence is installed by the bike
dealer for the respective buyer. If required, additional maps can be down-
loaded via your smartphone application "Bosch eBike Connect" and be
transferred to your on-board computer.
If you have an active WLAN connection, it is possible to load any maps di-
rectly onto Nyon via "Settings">"Map & Navigation"> "Map Manager".
Bosch eBike Systems
English – 23
1 270 020 Wen | (13.5.16)