Connecting Control Cable; Connecting The Ac Power Cable; Eco-Power/Standby Features; Switching On/Off - Hitachi AXM649BT Instruction Manual

Connecting Control Cable

Connect the control cable between the CD player and the amplifier.

Connecting the AC Power Cable

Insert the AC Power cable into a wall outlet, then your unit is ready to use.
Caution: * Be sure to unplug the power plug from the outlet when going out or when the unit is not
in use for an extended period of time.
* The mains plug is used as the disconnect device and it shall remain readily operable.

ECO-Power/Standby Features

Switching ON/OFF

When you insert the AC Power cable into a wall outlet, the unit will be in standby mode.
• Press the
Standby
• Press the
Standby
scroll across the display.
Switching the system to ECO Power/Standby mode
Press and hold the standby
normal standby.
* ECO Power standby mode
The clock will not be displayed. Press the
* Normal standby mode
The clock display on the LCD.
01_AXM649BT_GB_P41013409-A101_20 Mar 13.indd 14
AUX N 1 AUX IN 2
L L
R R
ABLE
AC
CABL
SPEAKER OUTPU (6 )
button to switch the unit on. The word "HELLO" will show in the display.
button to switch the unit back to standby mode. The words "BYE BYE" will
button for 2 seconds or more to switch to ECO Power Standby or
CLOCK
GB-14
The CD player
ANTENNA
FM
The Amplifier
button to display the clock on the LCD.
2013-3-20 9:44:05