Renault R-LINK2 Driver's Handbook Manual page 53

NAVIGATION SETTINGS
"Visual guidance"
This menu displays information relating
to your route on the navigation screen.
"Data fields"
The data fields in the corner of the
navigation screen can be custom-
ised. Select this option and choose the
values you want to see. The values
can differ depending on whether you
are following a route or whether you
are travelling without a set destination.
You can choose to display the remain-
ing distance to your destination/next
waypoint, the remaining time until you
reach your destination/next waypoint,
or the estimated arrival time for your
destination/next waypoint.
(4/5)
"Signposts"
Whenever relevant information is avail-
able, such as information similar to that
displayed on road signs, it will be dis-
played in the upper section of the map.
You can turn this feature on or off.
"Junction view"
If you are approaching a motorway
junction or a complex crossroads and
the necessary information exists, the
map is replaced with a 3D view of the
junction. You can activate this function
or keep the standard display through-
out your route.
To reset your data and go back
to the default settings, press the
pop-up menu button, then "Reset".
"Tunnel view"
When entering a tunnel, the surface
roads and buildings can count as a dis-
turbance. This feature shows a generic
image of a tunnel instead of the map.
A top-down overview of the tunnel and
the remaining distance to the tunnel
exit are also displayed.
For safety reasons, carry
out these operations when
the vehicle is stationary.
2.21