Keyboard - Geonav 6 Sunshine User And Installation Manual

Cartridge Installation
WARNING: The rubber cover should be removed only when inserting or replacing
the cartridge.
WARNING: Always use CompactFlash™ cartridges certified by Navionics. The
use of non-certified cartridges may result in improper operation of the unit.
The CompactFlash™ cartridges can be used as a mass-storage
with any PC computer, so can be the cartridge used by the
plotter. However, the plotter needs to find some free space in
the cartridge in order to work properly. Prior to use a new
cartridge, always make sure that there are at least 2.5MB of
free space.
WARNING: Be careful when handling the cartridge files by using the PC. Windows
allows deleting and moving files easily, therefore pay attention when using Windows
Explorer not to erase the content of the \NAVIONIC and \GEONAV folders. Damaging
the files stored in such directories may result in loss of data or improper operation of
the unit.
English

Keyboard

12
KEYBOARD
ZOOM+/ZOOM-
Selects the chart range.
ENTER
Enters a waypoint or a
marker, or confirms a
selection from the menu.
PAGE
• Navigation mode:
Turns navigation data
pages.
• Cursor mode:
Allows switching from
Cursor mode to Navi-
gation mode.
GOTO
Allows plotting a route to-
ward a manual cursor
position, desired marker,
port, nearest port service
or specified position (lat/
lon).
CLR
• Navigation mode:
Deletes the current
route.
• Cursor mode:
Deletes the last
waypoint or the
marker pointed by the
cursor.
CURSOR
• Moves the manual
cursor across the
screen.
• Allows switching from
Navigation mode to
Cursor mode.
• Allows selecting from
the options in the
menu /submenu.
• At start-up, allows
adjusting the screen
contrast.
PWR
• Switches the GEONAV
on / off.
• Allows adjusting the
screen backlight.
• Allows adjusting the
screen contrast.
English
13