Setup - Geonav 6 Sunshine User And Installation Manual

Marker
assigned to the marker; to change the marker symbol and name
according to the type of marker to store (e.g., fishing spots,
submerged wrecks, rocks, etc.), use the CURSOR key. Press
ENTER to confirm the insertion.
Route to a marker
See the GOTO functions.
MAIN MENU
Storing a set of markers in the CompactFlash™
Press the PAGE key to display the menu, select MARKER, then
STORE and press ENTER. Use the CURSOR key to change the
default name and confirm.
The "MRK. STORED" message will confirm that markers have
been stored correctly. Once stored, markers will disappear
from the screen.
Each time a set of markers is stored in the CompactFlash™,
the plotter memory is cleared and the indicator of the markers
available is reset to the maximum value.
Recalling a set of markers from the CompactFlash™
Press the PAGE key to display the menu, select MARKER and
then RECALL to open the marker catalog.
Use the CURSOR key to select the set desired and confirm, or
press PAGE to exit.
Deleting a set of markers
Press the PAGE key to display the menu, select MARKER, DE-
LETE and press ENTER to confirm.
The catalog that lists the sets of markers stored in the
CompactFlash™ will show the CURRENT item indicating the
set currently displayed.
Use the CURSOR key to select the set of markers to delete and
to confirm. When selecting CURRENT, the set of markers cur-
rently displayed will be deleted.
English

Setup

48
SETUP
The SETUP menu allows setting the available options.
To access the SETUP menu, press PAGE repeatedly to display
the menu, select the SETUP item, then use the CURSOR key to
browse through the options and change the settings.
• Mode (BRIGHT/DAY/NIGHT)
(G6 Sun, BRIGHT mode only;
(G 5C, BRIGHT and DAY
modes only)
Selects the colors suitable for
the environment.
• Chart Rotation (ON/OFF)
Enables / disables the Chart
Rotation function.
• Select Chart (ON/OFF)
Selects the chart to load from
the CompactFlash™.
• Depth Contours (ALL/5m/
10m/20m/OFF)
Selects the display of depth
contours.
• Safety Contours (OFF/2m/
5m/10m/20m)
Enables the display of the areas corresponding to the depth
safety contour.
• Light Sectors (ON/OFF)
Enables / disables the display of light sectors.
• Spot Soundings (ON/OFF)
Enables / disables the display of depth point values.
• Names (ON/OFF)
Enables / disables the display of geographical names.
• Chart Boundaries (ON/OFF)
Enables / disables the display of chart boundaries.
• Easy View (ON/OFF)
Enables / disables the Chart Magnification function.
49
English