Before Installing The Appliance; Does Your Old Appliance Have A Different Hinging Mechanism - Miele KFN 37692 iDE Operating And Installation Instructions

Before installing the appliance

 Take the accessory pack which in‐
cludes installation parts and other ac‐
cessories out of the appliance and
remove the packaging strap holding
the door in place.
 Do not remove the following from
the back of the appliance:
– The spacers (depending on model).
These ensure the gap required be‐
tween the back of the appliance and
the wall is maintained.
– Depending on model, the pouches
located in the metal grille (heat ex‐
changer).
They are required for the correct
functioning of the appliance. The
contents are not poisonous or dan‐
gerous.
 Remove the cable clip from the back
of the appliance.
 Check that all parts at the back of the
appliance are unhindered. Carefully
remove any hindrance.
 Open the appliance door and remove
the red safety catch  (depending on
model).
Does your old appliance have a dif‐
ferent hinging mechanism?
If your old appliance had a different
type of hinging, the furniture door can
still be used. Remove the old hinges
from the housing unit. They are no lon‐
ger required because the furniture door
is now fitted to the appliance door. All
the necessary parts are supplied or can
be ordered from Miele.
Installation
91