Switching The Ice Cube Maker On And Off - Miele KFN 37692 iDE Operating And Installation Instructions

Switching the ice cube maker on and
off
 Touch the settings sensor.
All symbols available for selection will
appear in the display and the  symbol
flashes.
 Touch the sensors for setting the
temperature ( or ) repeatedly until
the ice cube maker symbol  flash‐
es in the display.
 Touch the OK sensor to confirm your
selection.
 Use the  and  sensors to set the
ice cube maker:
0: Ice cube maker is switched off
1: Ice cube maker is switched on
 Touch the OK sensor to confirm your
selection.
The selected setting is applied.
 Touch the settings sensor to leave
settings mode or
 close the appliance door.
Otherwise the appliance will switch to
normal operation after approximately
one minute.
Making ice cubes
Only make normal domestic quantities
of ice cubes with the ice cube maker.
Ice cubes can only be made when the
ice cube drawer is closed completely.
After the appliance is switched on for
the first time, it can take up to
24 hours for the first ice cubes to drop
out of the ice cube maker and collect
in the drawer.
Thereafter, when the ice cube maker
is switched off and then on again it
will take up to a maximum of 6 hours
for ice cubes to be produced.
The ice cube maker can be switched
off independently of the freezer sec‐
tion if you do not want the appliance
to make any ice cubes.
If the ice cube maker is switched off,
the ice cube drawer can be used as
an extra drawer for freezing fresh food
and storing frozen food.
53