Switching The Ice Cube Makeron/Off With The On/Off Button - Miele KFN 37692 iDE Operating And Installation Instructions

 By touching the  or  sensor, you
can now set the water volume you re‐
quire (E1 to E8):
E1: low water volume
E8: high water volume
 Touch the OK sensor to confirm your
selection.
The selected setting is applied.
 Touch the settings sensor to leave
settings mode, or
 Close the appliance door.
Otherwise the appliance will switch to
normal operation after approximately
one minute.
Making ice cubes
Switching the ice cube maker
on/off with the On/Off button
 Pull the ice cube drawer out slightly.
 Press the On/Off button  on the ice
cube maker,
– until the indicator light comes on.
The ice cube maker symbol  will
appear in the display. The ice cube
maker is switched on.
– until the indicator light goes out. The
ice cube maker symbol  will go
out in the display. The ice cube mak‐
er is switched off.
 Close the ice cube drawer.
55