Before Installing The Appliance - Miele FN 35402 i Operating And Installation Instructions

Installation
Weight of the furniture door

If the furniture door panel is too
heavy, this can cause damage.
Fitting a furniture door panel which is
heavier than the maximum permitted
weight could damage the hinges.
This can cause subsequent func-
tional problems.
Before fitting a furniture door, ensure
that the weight of the door does not ex-
ceed the maximum permitted.
Refrigeration appli-
ance
FN 35402 i, FN
37402 i, FNS 35402
i, FNS 37402 i
When fitting large or divided furniture
doors, an extra fitting kit or set of fix-
ing brackets should be used. These
are available to order from the Miele
Customer Service department or deal-
ers.

Before installing the appliance

 Take the accessory pack which in-
cludes installation parts and other ac-
cessories out of the appliance and re-
move the packaging strap holding the
door in place.
 Do not remove the following from
the back of the appliance:
60
Maximum
weight of fur-
niture door in kg
26
– The spacers (depending on model)
These ensure the gap required
between the back of the appliance
and the wall is maintained.
– The bags (depending on model) loc-
ated inside the metal grille (heat ex-
changer).
These are important for the correct
functioning of the appliance. Their
contents are non-toxic and are not
dangerous.
 Remove the cable clip from the back
of the appliance.
 Open the appliance door and remove
the red safety catch  (depending on
model).