Door Seal; Ventilation Gaps - Miele KFN 37692 iDE Operating And Installation Instructions

Door seal

Do not use any grease or oil on the
door seal as these will cause the seal
to deteriorate and become porous
over time.
 The door seal should be cleaned reg‐
ularly with clean water, and then wi‐
ped dry with a soft cloth.

Ventilation gaps

 The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner.
A build-up of dust will increase the
energy consumption of the appliance.
After cleaning
 Replace all shelves and accessories
in the appliance.
The left-hand shelf supports have
metal discs (contacts) which supply
power to the LED lighting.
Make sure that the contacts are clean
and dry before inserting the shelves
with LED lighting.
Push the shelf in until it clicks into po‐
sition, as otherwise the lighting will not
work.
 Reconnect to the mains and switch
the appliance back on.
 Switch on the Super freeze function
for a while so that the freezer section
can cool down quickly.
 Switch on the Super cool function for
a while so that the appliance can cool
down quickly.
 Place food in the refrigerator section
and close the door.
Cleaning and care
 Once the temperature in the freezer
section has reached the required
temperature, place the food back in
the freezer drawers and put them
back in the freezer section.
 When the temperature in the freezer
section is a constant -18 °C or colder
press the Super freeze button to
switch the Super freeze function off.
65