Table of Contents
Advertisement
CS-ME7DKEG CS-ME10DD3EG / CS-ME10DTEG CS-E15DB4EW
b. Operation Mode + Ionizer Operation.
1. Ionising Operation Start Condition
When air conditioner unit is in "ON" condition (Heat, Cool, Dry, Fan, Auto mode) and an ION operation button at remote
control is pressed. Ionizer on & ION LED illuminates. (3 → 4)
Power LED also illuminates.
2. Ionising Operation Stop Condition
When one of the following conditions is satisfied, ION operation stops.
a. Stopped by ON/OFF switch.
b. Timer OFF activates.
c. ION feedback signal shows error.
3. When "ION" is displayed on the remote controller, Ionizer operates.
c. Timer during ionizer operation
Refer to case study in next page for details.
9.1.1.17.1. Ionizer Problem Detection Control
i. Purpose
To inform user of ionizer problems and detection.
ii. Two types of problem detection control:
Control
ERROR
PROTECTION
(i) Actual ion: ON
(ii) ion feedback signal:
0V
BREAKDOWN
PROTECTION
(i)
Actual ion: OFF
(ii)
ion feedback signal:
5V
Detection Method
(i) Actual ion ON for 10s & OFF for
30 min. continuously for 24 times
(approx. 11 hr. 30 min.)
(ii) Within 24 counts, if anytime
CONDITION becomes false then
count is cleared.
(i) Actual ion OFF
2s
Protection
(i) Actual ion is permanently OFF & ion
LED is blinking.
(ii) Press remote control ion button for
a) ON: Ion LED blink & buzzer = beep
b) OFF: Ion LED OFF & buzzer = beep
Case 1: During Air-Con. ON.
(i)
Air-Cond OFF with abnormal no. H26 is
activated with timer LED is blinking
permanently.
Case 2: During Air-Con. OFF.
(i)
Abnormal no. H26 is activated with
timer LED is blinking permanently for
both cases 1 & 2.
(ii) Press remote control ion button for
a) ON: Ion LED blink
b) OFF: Ion LED OFF
(iii) Press any remote control button to
a) ON: Buzzer = beep beep beep beep
b) OFF: Buzzer = beep beep beep beep
52
Recovery
(i) Press ON/OFF button
to OFF
(ii)
Reset power
(iii)
Off by force operation
(i) When anytime
CONDITION becomes
false.
(ii) Once recovered, ion &
Timer LED stops
blinking permanently.
(iii) Main power reset.
Hide quick links:
Advertisement
Table of Contents
