Select The Recall Duration; Dial Mode; Auto Clock; Register Additional Handsets - Philips X200 Extended User Documentation

3
Enter the detect number, then press OK
to confirm.
4
Enter the prefix number, then press OK to
confirm.
» The setting is saved.
Note
•
To enter a pause, press and hold
•
If the prefix number is set and the detect number is left
empty, the prefix number is added to all outgoing calls.
•
The feature is unavailable if the dialed number starts
with * and #.

Select the recall duration

Make sure that the recall time is set correctly
before you can answer a second call. In normal
case, the phone is already preset for the recall
duration. You can select among 3 options:
[Short], [Medium] and [Long]. The number of
available options varies with different countries.
For details, consult your service provider.
1
Press MENU.
2
Select [Services] > [Recall time], then
press OK to confirm.
3
Select an option, then press OK to
confirm.
» The setting is saved.

Dial mode

Note
•
This feature is country dependent and only applies to
models that support both tone and pulse dial.
Dial mode is the telephone signal used in your
country. The phone supports tone (DTMF) and
pulse (rotary) dial. Consult the service provider
for detailed information.
.
Set the dial mode
1
Press MENU.
2
to select [Services] > [Dial
Press /
mode], then press OK to confirm.
3
Select a dial mode, then press OK to
confirm.
» The setting is saved.
Note
•
If your phone is in pulse dial mode, press
call for temporary tone mode. Digits entered for this
call are then sent out as tone signals.

Auto clock

Note
•
This service is network dependent.
•
Make sure you have subscribed to the caller ID service
before you use this feature.
It synchronizes the date and time on your
phone with the public switched telephone
network (PSTN) automatically. For the date to
be synchronized, make sure the current year is
set.
1
Press MENU.
2
to select [Services] > [Auto
Press /
clock], then press OK to confirm.
3
Select [On]/[Off], then press OK to
confirm.
» The setting is saved.

Register additional handsets

You can register additional cordless handsets to
the base unit. The base unit can register up to 4
handsets.
1
Press MENU on the handset.
during a
EN 25