Saving A Zone And A Channel To A Button; Receiving And Responding To A Radio Call; Receiving And Responding To A Talkgroup Call - Motorola APX 8000 3 User Manual

1 Toggle your zone and channel to the required
zone and channel.
2
or to MS1, MS2 ... or MS5.
3 Press and hold the Menu Select button directly
below one of the softkey (MS1 – MS5).
You hear a short, medium-pitched tone when the
zone and channel is saved.
Note
To change the programmed zone and
channel, repeat this procedure.
Short press of the programmed softkey
changes your current transmission to the zone
and channel programmed in this softkey.

Saving a Zone and a Channel to a Button

You can save the frequent used zone and channel to
the programmable buttons and keypad digit 0 to 9
buttons.
1 Toggle your zone and channel to the required
zone and channel.
2 Press and hold the button you desire to program.
You hear a short, medium-pitched tone when the
zone and channel is saved.
Note
Repeat this procedure to change the zone and
channel of the programmed button.
Short press of the programmed button
changes your current transmission to the zone
and channel programmed in this button.

Receiving and Responding to a Radio Call

Once you have selected the required channel and/or
zone, you can proceed to receive and respond to
calls.
The LED lights up solid red while the radio is
transmitting. In conventional mode, the LED lights up
solid yellow when the radio is receiving a
transmission. In trunking mode, there is no LED
indication when the radio receives a transmission.
If the radio is receiving a secure transmission, the
LED blinks yellow.

Receiving and Responding to a Talkgroup Call

To receive a call from a group of users, your radio
must be configured as part of that talkgroup.
BETA
59
English