Selecting Or Changing The Ars Mode - Motorola APX 8000 3 User Manual

The Automatic Registration Service for the radio
consists of two (2) modes:
• ARS Server Mode (default mode)
• ARS Non-Server Mode
Note
The default ARS mode can be changed by a
qualified radio technician using the radio's
programming software.

Selecting or Changing the ARS Mode

The following methods are options on how to select
or change the ARS Mode. The result of all the
methods is the same. You can use the options
interchangeably depending on your preference and
the programmed functions.
• Selecting or Changing the ARS mode via 16-
Position Select knob:
a) Once the zone you want is displayed, turn the
preprogrammed 16-Position Select knob to
the desired mode.
• Selecting or Changing the ARS mode via the radio
menu:
a)
or to Chan.
98
English
b) Press the Menu Select button directly below
Chan.
The display shows the current channel name.
c) or
One of the following scenarios occur:
• In ARS Server Mode, the display shows the
zone and ARS server channel.
• In ARS Non-Server Mode, the display
shows the zone and ARS non-server
channel.
• If the channel or mode selected is
unprogrammed, the display shows
Unprogrammed. Repeat this step.
d) Press Sel to confirm the displayed channel.
User Login Feature
This feature allows you as the user to be associated
with the radio. With this association, every data
application (Example: Text Messaging Service) takes
on a friendly username.
You can still send text messages without logging in
as a user. The user login feature only enables the
recipient of your message to identify you as the
sender by assigning a username to your message.
BETA
to the required channel or mode.