Sending A Query - Motorola APX 8000 3 User Manual

Hide thumbs Also See for APX 8000 3:
Table of Contents

Advertisement

1 Press the Menu Select button directly below
Logt.
One of the following scenarios occurs:
The display shows Clear private data?.
If the Delete Messages On Session End
feature is enabled, the display shows
momentary Private data cleared.
2 Select Yes to clear all your private data or select
No to keep your private data.
If you select Yes, the display shows momentary
Private data cleared.

Sending a Query

This feature is available for radio users who have
successfully logged in with the Two-Factor
Authentication. Query is a special form of Quick Text
marked with a flag that is replied or dispatched in
normal TMS message. The query template needs to
be configured in the quick test list of the CPS. You
can choose from the quick text list, including queries
if present.
You shall receive a service advertisement message
to indicate the Query is available after you have
successfully logged in the radio with a Two-Factor
Authentication.
Note
The query server must be selected as the
destination so that it can receive the query
message and respond the query with text
message. The query server must be an entry
in the data user list in the CPS.
1 Perform one of the following actions:
To access this feature via a preprogrammed
button, press the preprogrammed TMS Query
button and proceed to Step 5.
To access this feature via the menu, proceed
to the next step.
2
or to TMS and press the Menu Select button
directly below TMS to access the TMS feature
screen.
3 Perform one of the following actions:
or
Select button directly below Sel.
Press the Menu Select button directly below
Exit to return to the Home screen.
BETA
to Compose and press the Menu
115
English

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Apx 7000xe model 3Apx series 8000-3

Table of Contents