Setting Up Remote Access And Wi-Fi ® Connection - Observer TSTAT0201CW Installation Manual

Setting Up Remote Access and Wi-Fi
®
Connection
The Observer Communicating Wall Control can connect
®
through an in-home Wi-Fi network to connect to the Inter-
®
net. If the in-home Wi-Fi network or router is found to be in-
compatible with the Observer wall control, an accessory Ob-
server Wireless Access Point (NAXA00101WA) or any other
compatible wireless router can be installed to establish Wi-Fi
connectivity. Wi-Fi range extenders may also be used if the
wall control is located a significant distance away from the
Wi-Fi access point or router. More information may be found
at the www.MyObserverComfort.com website.
Please contact your distributor, or call the help desk (avail-
able 8:00 AM - 5:00 PM ET, M-F) at 877-591-8908, if you
need help with Wi-Fi set-up and connection to the MyOb-
serverComfort web server.
See the Owner's Manual for complete instructions on
commissioning the Wi-Fi connection.
®
Connect the blue WAN port of the optional NAXA00101WA
accessory (TP-LINK ) Wireless Access Point to the home-
®
owner's existing router LAN port using the provided Ethernet
cable. The LAN ports on the back of the TP-LINK Wireless
Access Point should not be used for other devices. The TP-
LINK Wireless Access Point should only be used for connec-
tion of the Observer wall control, and is not intended to be
R
used wired or wirelessly with any other devices. Connect the
provided antenna and apply power to the wireless access
point using the provided power supply.
616 01 1019 01
28