MOSTAT DEMO MODE if no communicating equipment is
found.
If a communicating indoor unit is found, but a communicating
outdoor unit or relay board is not found, the installer will be
prompted to select the outdoor type; either AC, Heat Pump,
or NONE.
Selecting Accessories
Once the indoor and outdoor equipment have been found or
entered, the following screen will appear allowing the In-
staller to select "HUMIDIFIER INSTALLED". Press YES or
NO to make the appropriate selection.
Selecting Indoor Unit
If there is no communicating indoor unit, the screens below
will appear. The installer should select the indoor unit type
(furnace or fan coil), then select the indoor unit stages
(single or two-stage).
NOTE: Two-stage outdoor selection is only available when a
daughter-board is installed.
616 01 1019 01
24