One Ds5100 And Ds5300 Cabled To Two Exp5000S Behind The Same Ds5100/Ds5300 Drive Channel Port Using A Non-Trunking Cabling Scheme - IBM DS5100 Installation, User's, And Maintenance Manual

EXP810/EXP5000
3 6
1
EXP810/EXP5000
3 6
9
Figure 38. One DS5100 and DS5300 cabled to two EXP5000s behind the same
DS5100/DS5300 drive channel port using a non-trunking cabling scheme
Figure 39 on page 64 shows an example of connecting two EXP5060s behind
controller A drive ports P8 and P6 and controller B drive ports P1 and P3.
Note: This is an example to illustrate the capability to connect more than one
EXP5060 behind a storage subsystem controller drive port. This is not the
recommended cabling scheme when you have only two EXP5060s in a
storage subsystem configuration.
EXP810/EXP5000
3 6
2
3 6
EXP810/EXP5000
3 6
10
3 6
Chapter 3. Cabling the storage subsystem
3 6
3 6
63