IBM DS5100 Installation, User's, And Maintenance Manual page 28

Table 1. Where to find DS4000, DS5100, and DS5300 installation and configuration
procedures (continued)
xxvi
IBM System Storage DS5100 and DS5300 Storage Subsystem: Installation, User's, and Maintenance Guide
Installation task
6 Power up the
subsystem
7 Configure DS4000,
DS5100, and
DS5300 network
settings
8 Zone the fabric
switch
(SAN-attached only)
9 Install DS Storage
Manager software on
the management
station
10 Install host software
(failover drivers) on
host server
11 Start DS Storage
Manager
12 Set the DS Storage
Manager clock
13 Set the DS Storage
Manager host default
type
Where to find information or procedures
v IBM System Storage Quick Start Guide for the following
storage subsystems:
– DS5100 and DS5300
– DS4800
– DS4200 and DS4700
v IBM System Storage DSxxxx Installation, User's, and
Maintenance Guide for the following storage subsystems:
– DS5100 and DS5300
– DS4800
– DS4700
– DS4500
– DS4400
– DS4300
– DS4200
– DS4100
v IBM System Storage DSxxxx Installation, User's, and
Maintenance Guide for the following storage subsystems:
– DS5100 and DS5300
– DS4800
– DS4700
– DS4500
– DS4400
– DS4300
– DS4200
– DS4100
v IBM System Storage DS Storage Manager Installation and
Host Support Guide
v DS Storage Manager Copy Services Guide (describes switch
zoning for the Remote Mirror Option)
v See also the documentation provided by the switch
manufacturer
v IBM System Storage DS Storage Manager Installation and
Host Support Guide
v DS Storage Manager online help (for post-installation tasks)