Care And Maintenance - Gtech SW05 Safety And Instruction Manual

Care & Maintenance
WARNING: Do not accidentally turn the unit on while cleaning it.
1 Each week clean the product with a dry cloth and remove hair and fibre build up from
the Brush Bar.
2 To clean the Brush Bar, remove the belt cover, slide the belt off the end of the Brush
Bar, then lift the Brush Bar out of the unit.
3 Don't use abrasive materials to clean the product or immerse it in water.
4 Don't pick up liquids or use on wet floors.
5 Don't use on concrete, Tarmacadam or other rough surfaces.
6 Don't pick up pieces of string or fabrics with the unit.
7 Don't clean rug tassels or frayed carpets with the unit.
If The Product Is Not Working Properly:
1 Empty the Dust Container.
2 Remove any build-up of hair or fibre from the Brush Bar.
3 Fully discharge the product (run until battery is flat) and then recharge for 12 hours.
4 Telephone the Gtech Helpline on: 01905 345891.
If the product needs to be repaired or replaced only use parts which are approved by
the manufacturer.
For further help, technical advice, or to order spare or replacement parts
contact the Gtech Customer Services Helpline.
01905 345891
Tel:
helpline 01905 345891 email support@greytechnology.co.uk web www.gtechonline.co.uk
support@greytechnology.co.uk
email:
9