Using The Camera; Installing The Batteries - Intova SP10 User Manual

Movie Size
White balance
Sounds
Frequency
Power Save
Language
Date/Time
Format
Reset All
Version
Note: The camera will remain on the last setting when it is turned off.

5. Using the camera

5.1 Installing the batteries

1. Open the battery door.
2. Insert 2 x AAA alkaline batteries into the camera.
3. Close the battery door.
5.2 Inserting a memory card (not included)
This camera has no built-in internal memory. Micro SD memory card is required (not included).
Follow the instructions below to insert the optional micro SD memory card into the camera.
VGA 640 x 480
QVGA 320 x 240
Auto
Daylight
Cloudy
Tungsten
Fluorescent
Off/On
50Hz / 60Hz
Off / 1Minute / 3 Minutes
English/German/Italian/
Portuguese/French/Spanis
h/ Japanese
YY/MM/DD;DD/MM/YY
MM/DD/YY;
Yes/ No
Yes/ No
5
Video resolution setting
Automatic white balance
White balance selected for
daylight conditions with good
sunlight
White balance selected for cloudy
conditions
White balance selected for
tungsten lighting
White balance selected for
fluorescent lighting
Microphone
Select power frequency in your
location
Auto power off selection
Display language selection
Date or time setting
Format the memory location
selection.
Reset all settings
See the firmware version