Setting The Resolution; Taking Photographs - Intova SP10 User Manual

1. Turn off camera.
2. Open the battery door.
3. Insert the micro SD card into the camera.
Note: There is only one correct direction to insert the micro SD memory card into the slot. Do
not force the card into the memory card-slot, it may damage both the camera and the
micro SD memory card.
Note: The micro SD memory card must be formatted before taking photographs. See the
following sections for more information.
5.3 Formatting the micro SD card
1. Press the menu button (
2. Select the setup mode by pressing the right button.
3. Select the format icon by pressing the
confirm.
4. Press the SHUTTER button to format the SD memory card.

5.4 Setting the resolution

The camera can be set to different resolutions.
1. Press the menu button (
( ) key and press the SHUTTER to confirm.
Resolutions: VGA (640 x 480), 3M (2048 x 1536),
5M (2592x1944), 10M (3648x2736),
16M (4608x3456)
2. Five different resolutions will be displayed. Select the desired resolution by using the up
or down button and press the SHUTTER button to confirm the selection.

5.5 Taking photographs

1. Turn on the camera.
2. Depending on the distance to the object being photographed, use macro switch to adjust
the distance. Select the flower symbol (
(11cm –18 cm).
If you wish to take a video or a photograph of surroundings or people (0.5m – infinity), set
the macro switch to normal mode (
3. If you are not sure if there is enough lighting, turn on the automatic flash(
) in PHOTO or VIDEO mode.
W
( ) button and press the SHUTTER button to
) in PHOTO mode, select the resolution icon using the
) if you wish to take a close-up photograph
).
6
W
) by pressing