Setting Up; Choosing The Power Sources - Sony ZS-D55 Operating Instructions Manual

Setting Up

Choosing the
power sources
You can use the AC power or
batteries as a power source.
Use the AC power source
whenever you record since
recording consumes much
power.
Note
Be sure to turn off the
power of the player
before connecting/
disconnecting the
mains lead or
removing/inserting
batteries.
Tip
With normal use, the
back-up batteries
should last for about
six months when the
player is operated on
batteries. When the
time display dims or
when the timer
function is disabled,
replace all the batteries
with new ones. To save
the preset settings,
replace the batteries
with the mains lead
connected.
Tip
The sound quality may
be changed depending
on the polarity of the
plug. Change the
direction of inserting
the plug and check the
sound quality.
GB
30
Setting Up
14
Battery compartment
1 Inserting the back-up batteries
Insert four R6 (size AA) batteries (not supplied) into
the battery compartment. These batteries work to save
the memory data.
To remove the batteries, push the e side.
2 Connecting the mains lead
Insert one end of the supplied mains lead to the AC
IN socket located at the rear of the player, and the
other end to the mains.
AC IN
2
to the mains
Insert four R6 (size AA)
batteries (not supplied)