Table of Contents
Advertisement
14
200P6 LCD
Go to cover page
Warning message table
Item
Attention Signals
1
CANNOT DISPLAY THIS
VIDEO MODE, CHANGE
COMPUTER DISPLAY
INPUT TO 1600X1200@
60HZ
2
NO VIDEO INPUT
3
CHECK CABLE
CONNECTION
4
ENTERING SLEEP
MODE
5
WAITING FOR
AUTOMATIC
ADJUSTMENT
6
USE 1600X 14 FOR
BEST RESULT
7
OSD MAIN CONTROLS
LOCKED
8
OSD MAIN CONTROLS
UNLOCKED
9
the window of OSD
"MONITOR SETUP "
10
the window of
"BRIGHTNESS"
11
the window of "VOLUME"
12
"SELECTED INPUT NOT
AVAILABLE"
Warning Message
Display Time
Condition
30 mins
This warning appears when the input signal from your computer is not in a
standard video mode or is out of the monitor s scanning range. After 30
mins, monitor enters sleeping mode.
30 mins
This message appears when there is no signal input but with cable while AC
or DC power on. After 30 mins, monitor enters sleeping mode.
30 mins
This message appears when a signal cable is disconnected while monitor is
working. After 30 mins, monitor enters sleeping mode.
3 secs
This message appears when monitor is about to enter power saving mode.
till auto adjustment
This message is displayed when the auto adjustment button is pressed. It
finished
disappears when automatic adjustments are completed.
On top of OSD main
The message will show up at the top of the OSD main menu in red color
menu
when the input resolution is not the 1280x1024.
3 secs / or Till "OSD
This message will appear 3 seconds to indicate the OSD MAIN CONTROLS
MAIN CONTROLS
status when to lock or un-lock it by pressing "MENU(OK) " button for more
UNLOCKED" appear
than 10 seconds while there is video input from PC. This function provides
the alternative that user can lock all the OSD main control in case user don
t want the FOS performance setting to be changed, for instance, during
commercial exhibition.
3 secs
This message will appear 3 seconds to indicate the OSD MAIN CONTROLS
status when to un-lock it by pressing "MENU (OK) " button for more than 10
seconds while there is video input from PC.
60 secs
This message will appear when the "OK" button is pressed.
60 secs
This message will appear when the BRIGHTNESS button is pressed.
60 secs
This message will appear when the VOLUME button is pressed.
3 secs
This message will appear 3 seconds to indicate the SIGNAL SOURCE status
when change the signal source but it is not found while there is video input
from PC.
Advertisement
Table of Contents
