Table of Contents
Advertisement
28
200P6 LCD
Go to cover page
Configuration and procedure
"Easywriter " The software is provided by Novatek to upgrade the
firmware of CPU.
It is a windows-based program, which cannot be run in MS-DOS.
DDC2BI_ISP TOOL (3138 149 53161) is for the interface between
"Parallel Port of PC" and "15 pin-D-SUB connector of Monitor".
System and equipment requirements
1.
An i486 (or above) personal computer or compatible.
2.
Microsoft operation system Windows 95/98/2000/XP.
3.
ISP Software " Easywrite "
4.
DDC2BI_ISP TOOL (3138 106 10396)
Parallel Port to Print Port in PC
5.
Connect
DDC2BI_ISP TOOL
in Fig. 2.
Monitor (A)
Connect to
Mains cord
Video cable
Fig.2
6. Install and setup the Easywriter program
Step 1 : Make a folder in your PC as shown in Fig. 3.
For example : C:\200P6
Step 2 : Copy ISP Software Easywriter
as shown in Fig.3.
Step 3 : Unzip Easywriter.zip into your folder as shown in Fig. 3.
Step 4 : Double click the EasywriterV2.09a_user.exe icon to install the
Application as Fig. 4.
ISP Instructions
as shown in Fig. 1
D-SUB to monitor
Fig. 1
and Mains cord to Monitor as shown
PC
200P6 -Monitor (B)
D-Sub
Connect to Mains
cord at this moment.
ISP box
.zip
into your folder
Fig. 3
Step 5 :Copy the 313811708421_141_8E0F to C:\200P6 as shown in
Fig. 5 .
Update the firmware
1.
Double click the Easywriter.exe icon in desktop then appears
window as shown in Fig.7 .
2.
Press the Load hex then select the hex as shown in Fig. 8.
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Advertisement
Table of Contents
